KVH Industries TracPhone V7 Instrukcja Użytkownika Pobierz pdf (Strona 4)

Before you begin, consider the following antenna

installation guidelines:

• Minimize blockage. The antenna requires a

clear view of the sky to transmit and receive

satellite signals (see Figure 2). The fewer

obstructions, the better the system will

perform.

• Make sure the mounting surface is wide

enough to accommodate the antenna’s base

(see Figure 3). Also make sure it is flat, level

(within ±1°), strong enough to support the

antenna’s weight (60 lbs, 27.2 kg), and rigid

enough to withstand heavy vibration.

• Select a location that is as close as possible to

the intersection of the vessel’s fore-and-aft

centerline and midships.

• Select a location that is well above any areas

accessible to passengers and crew to reduce

the risk of RF radiation exposure.

• Do not mount the antenna at the same level

as the radar because the radar’s energy might

overload the antenna. Ideally, you should

mount the antenna 4 ft (1.2 m) above the

radar, outside the beam path of the radar.

Blocked!

Antenna

Mast

Look Angle

Vessel Platform

5 to 80

Figure 2: Blockage from Obstruction

27.36"

(69.5 cm)

26.2"

(66.5 cm)

12"

(30.5 cm)

12"

(30.5 cm)

(15.2 cm)

4 x 1/2"

( 13 mm)

26.2"

(66.5 cm)

FWD

Figure 3: Antenna Dimensions

Side View

Bottom View

Plan the Antenna Installation

1 2 3 4 5 6 7 8 9 ... 29 30

Komentarze do niniejszej Instrukcji

Brak uwag

KVH Industries TracPhone V7 Instrukcja Użytkownika Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Anteny satelitarne KVH Industries TracPhone V7